Famco Chimney Cap & Crown Nationwide

Famco Chimney Cap & Crown in Bellevue: What to Know First

We provide independent Famco chimney cap and crown service in Bellevue, from cap installation on new flues to crown coating on weather-beaten masonry. Most Famco jobs are completed in a single visit after a camera-scan inspection, and every job starts with a written price before any work begins - no exceptions. If you own a Famco cap that’s rattling in a windstorm off Lake Washington, or a crown that’s taken fifteen years of Pacific Northwest drizzle, call (425) 696-0387 for a free estimate with exact pricing.

Call (425) 696-0387

How Famco Products Fail - and How We Fix Them

• Galvanized single-flue caps (GC series) rust through at the seams. The GC line uses 28-gauge galvanized steel with a factory powder coat that eventually chalks and cracks in Bellevue’s wet-season cycle. We see this most often on Lakemont and Newport Hills homes where the cap faces southwest into the rain. Our fix: pull the GC cap, inspect the flue tile for spalling underneath, and replace with a stainless Famco equivalent or a Gelco multi-flue cap if the chimney has shifted off-plumb.
• CC series chimney caps clog with creosote at the mesh. The CC’s 5/8-inch spark arrestor mesh is finer than competing brands, which traps glazed creosote during shoulder-season burns. Bellevue homeowners who burn Douglas fir from January through March hit this hardest. We remove the cap, soak the mesh in creosote remover on-site, and document flue condition with the camera before recommending a cleaning schedule or a cap with wider 3/4-inch mesh.
• Multi-flue caps (MC and LMC series) pull away from the crown. Famco’s multi-flue caps ship with generic L-brackets that don’t account for crowned chimneys with a wash slope. After three to four freeze-thaw cycles in Bellevue’s January cold snaps, the bracket seal fails and the cap tilts. We fabricate custom base flashing from 26-gauge stainless, anchor through the crown into the bond beam, and seal with a silicone-modified acrylic that flexes below 20°F.
• Crown wash cracks under Famco cap overhangs. Famco caps with a 2-inch or greater overhang create a drip line that concentrates water at the crown edge. On Bellevue’s 1970s-era chimneys with thin 1.5-inch crown washes, this causes delamination within five to seven years. We cut back the overhang or install a drip edge, then apply CrownCoat or a troweled cementitious overlay depending on crack depth - always photographed before and after under Haven Standard Clause 4.
• Damper-top caps (DTC series) seize in the closed position. The DTC’s integrated damper uses a worm-gear operator that corrodes when chimney condensate drips down the cable housing. This is a known issue in high-moisture Bellevue winters when the flue doesn’t warm enough to dry between burns. We disassemble the operator, replace the cable with a stainless aircraft-cable upgrade, and reseat the damper plate with high-temp graphite lubricant. If the cast-aluminum operator body is cracked, we source a replacement through Haven’s buying network rather than patching a part that’s already failed once.

Our Famco Chimney Cap & Crown Process

1. 1
   Call and schedule. A live person answers, notes your Famco model if you know it, and books a Level 2 camera inspection. You’ll get a text when your tech is en route.
2. 2
   Camera-scan inspection. We run the camera down the flue before touching the cap or crown. The camera doesn’t guess. Neither do I. Corrine Halstead and our Bellevue crew have found cracked flue tiles hidden under intact caps more times than we can count.
3. 3
   Written price, written scope. You get a flat price for the exact work, the parts spec (OEM Famco or quality aftermarket from Olympia Chimney or Gelco), and the warranty term. No work starts until you approve in writing - Haven Standard Clause 1.
4. 4
   Repair or replacement. We fabricate on our truck or pull from Bellevue inventory. Famco stainless caps are sourced through Haven’s buying network; if Famco lead time is two weeks and you’re in burning season, we’ll show you an equivalent Gelco or Copperfield cap with the same gauge and mesh spec.
5. 5
   Post-work camera verification and photo record. We document the finished crown slope, cap anchor points, and flue draft reading. Your photo record is archived under Haven Standard Clause 4, same as our 38,000+ previous jobs since 2009.
6. 6
   Cleanup and 365-Day Done Right Promise. We haul away the old cap. If anything’s not right in the next year, we make it right.

Before

After

What Famco Chimney Cap & Crown Costs in Bellevue

Bellevue’s permit requirements for crown rebuilds above the roofline can add $85-$140 to jobs requiring structural modification; we handle the filing and include it in your written price. Call (425) 696-0387 for a free estimate - estimates are free, and we honor our Free Second Opinion on any competitor’s written quote.

Why Bellevue Homeowners Call Level Two Chimney Bellevue for Famco Work

We’ve been on Bellevue roofs since 2009, including the older wood-burning fireplaces in Lakemont where the homes see real use through the wet season. Our techs carry Famco, Gelco, and Olympia Chimney inventory on the truck, so we’re not ordering parts while your flue stays open to the rain. Every job gets a named technician, a text when they’re on the way, and a documented photo record you can reference when you sell the house. The 365-Day Done Right Promise is stamped on every invoice. We’re independently owned and operated - not a franchise, not affiliated with Famco - and our license number is on every page we publish.

FAQs