Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Federal Way, WA
Chimney cap and crown work in Federal Way typically runs $340-$1,800 depending on whether we’re replacing a rusted chase cover on a 1980s prefab unit or rebuilding a masonry crown. We’re Level Two Chimney Co., and we serve Federal Way with NFPA 211 Level 2 camera inspections, written prices before any work starts, and a 365-Day Done Right Promise on every job. Call (425) 696-0387 for a free estimate.
Federal Way’s housing stock is dominated by 1970s-1990s tract homes with factory-built metal fireplaces rather than site-built masonry. That means our crews spend as much time inspecting chase covers, refractory panels, and factory flue systems as we do sweeping brick flues. The Pacific Northwest’s six-month heating season and 38-42 inches of annual rainfall accelerate corrosion on exposed metal components. Our Chimney Cap & Crown and Chimney Liner & Rebuild services are built specifically for what we find in these homes.
Why Federal Way Homes Are Different
Federal Way was built almost entirely between the mid-1970s and early 1990s, creating an unusually dense cluster of aging prefabricated zero-clearance fireplaces now 35-50 years old. Most were built with Heatilator, Majestic, or similar brands that carry a 20-30-year manufacturer lifespan. Our technicians regularly find cracked refractory panels, failed chase covers, and corroded firebox components in tract homes near Steel Lake and along the 320th Street corridor.
The maritime climate here means near-constant moisture attacking aging galvanized chase covers and mortar joints. Moss and algae growth on roofs wicks water into chimney flashing seams. Unlike Seattle’s older masonry stock or Tacoma’s more varied inventory, Federal Way’s uniform housing era means predictable failure patterns, and predictable failure patterns mean we can inspect with precision and quote accurately before we start.
Our Main Federal Way Services
Most Federal Way homeowners who call us need one of these three services:
Chimney Cleaning & Sweep in Federal Way
We remove Class I, II, and III creosote from factory-built and masonry flues, then run a camera to document flue condition. In Federal Way’s prefab systems, we also inspect the chase cover, firebox, and refractory panels for heat damage or moisture corrosion. Chimney Cleaning & Sweep in Federal Way
Chimney Repair in Federal Way
Our repairs target the specific failures we see in 1980s prefab units: rusted chase covers, spalling crown concrete, deteriorated flashing, and damaged chimney caps. Every repair starts with a camera inspection and ends with a photo record and written warranty. Chimney Repair in Federal Way
Fireplace Services in Federal Way
We service gas inserts, factory-built wood fireplaces, and traditional masonry systems. For Federal Way’s aging prefab units, we evaluate whether repair or replacement makes sense based on manufacturer parts availability and documented condition. Fireplace Services in Federal Way
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Cap & Crown in Federal Way
Chimney cap and crown work is the most common repair we perform in Federal Way, where original builder-grade galvanized chase covers on 1980s prefab chimneys have rusted through after decades of Pacific Northwest rainfall. Unlike masonry crowns that can be patched or coated, a rusted chase cover on a factory-built unit must be replaced to protect the interior flue and firebox from water damage no sweep can fix. Our Chimney Cap & Crown service includes NFPA 211 Level 2 camera documentation before and after.
Cap Replacement
Signs you need it
Water staining on the ceiling near the fireplace, rust streaks down the chase siding, or visible holes in the galvanized cover itself.
What it costs in Federal Way
Cap replacement in Federal Way typically ranges $340-$680 for standard prefab chase covers, with stainless steel upgrades running higher.
How we do it
We measure the chase top, fabricate or order a proper-fitting replacement in galvanized or stainless steel, and install it with a storm collar and proper sealant.
Crown Repair
Signs you need it
Cracks or spalling concrete on the masonry crown, water pooling on top, or pieces of concrete visible in the firebox or cleanout.
What it costs in Federal Way
Crown repair in Federal Way typically ranges $450-$950 for crack sealing and resurfacing, with full crown rebuilds at the higher end.
How we do it
We grind out cracks, apply a bonding layer, and pour new crown concrete with proper overhang and drip edge to shed water.
What Chimney Cap & Crown Costs in Federal Way
| Item | Typical range in Federal Way |
|---|---|
| Chase cover replacement (galvanized) | $340-$680 |
| Chase cover replacement (stainless steel) | $580-$920 |
| Crown crack repair and coating | $450-$950 |
| Full crown rebuild | $1,200-$1,800 |
| Multi-flue cap installation | $480-$890 |
How do I know if my chase cover or crown is failing?
Look for rust streaks on the chase siding, water stains on interior ceilings, or visible cracks in concrete crowns. We confirm with a camera inspection and show you the footage before quoting any work.
Can a damaged crown wait until next season?
A cracked crown lets water freeze and expand in winter, accelerating spalling; we document the rate of deterioration with photos so you can decide based on evidence, not pressure.
Chimney Liner & Rebuild in Federal Way
Chimney liner and rebuild work in Federal Way often involves factory-built metal fireplaces that have reached end of manufacturer lifespan, or masonry chimneys with deteriorated clay flue tiles compromised by decades of heavy heating-season use. Prefab units cannot be relined the same way masonry flues can; they require exact manufacturer-compatible components or complete system replacement. Our Chimney Liner & Rebuild service uses materials from HeatShield, Gelco, and Olympia Chimney sourced through our buying network.
Stainless Steel Liner
Signs you need it
Clay flue tiles with visible cracks, gaps, or missing pieces on camera inspection, or a chimney that fails draft testing despite being clean.
What it costs in Federal Way
Stainless steel liner installation in Federal Way typically ranges $2,400-$4,200 depending on flue height and diameter.
How we do it
We measure the flue, select the proper alloy grade, drop the liner with insulation wrap, and connect it to the appliance with a proper top plate and collar.
Partial Rebuild
Signs you need it
Spalling brick above the roofline, a leaning or separated chimney stack, or mortar joints eroded to the depth of a finger.
What it costs in Federal Way
Partial rebuilds in Federal Way typically range $3,500-$6,800 for work above the roofline, with scaffolding and weather protection included.
How we do it
We dismantle to sound masonry, rebuild with matched brick and proper bond, install new flashing, and document with before-and-after photos.
What Chimney Liner & Rebuild Costs in Federal Way
| Item | Typical range in Federal Way |
|---|---|
| Stainless steel liner (straight flue) | $2,400-$3,400 |
| Stainless steel liner (with offsets) | $3,200-$4,200 |
| Flexible liner installation | $2,800-$4,000 |
| Partial chimney rebuild | $3,500-$6,800 |
| Full chimney rebuild | $8,500-$15,000 |
Does my prefab fireplace need a liner replacement or full replacement?
Prefab units use factory-specific components; if the manufacturer no longer supports the model, full replacement is usually required. We verify parts availability and show you the documentation.
How long does a liner installation take?
Most stainless steel liner installations in Federal Way are completed in one day; we confirm the schedule and scope in writing before booking.
Brands We Service in Federal Way
We stock and install parts from HeatShield, Gelco, Olympia Chimney, and Famco, with components for most major prefab brands available through our network. Typical turnaround for ordered parts is 3-5 business days. See our brands for the full list.
Pricing for Chimney Cleaning in Federal Way, WA
| Service | Typical range in Federal Way |
|---|---|
| Level 2 chimney sweep and inspection | $280-$380 |
| Class III creosote removal | $450-$750 |
| Chase cover replacement (galvanized) | $340-$680 |
| Chase cover replacement (stainless steel) | $580-$920 |
| Crown crack repair and coating | $450-$950 |
| Full crown rebuild | $1,200-$1,800 |
| Multi-flue cap installation | $480-$890 |
| Stainless steel liner (straight flue) | $2,400-$3,400 |
| Stainless steel liner (with offsets) | $3,200-$4,200 |
| Partial chimney rebuild | $3,500-$6,800 |
Prices increase with roof pitch, chimney height, and the condition of existing components we discover during camera inspection. We deliver a written price, written scope, and written warranty before any work begins, every time.
Neighborhoods We Serve in Federal Way
We dispatch crews to all Federal Way neighborhoods from our Seattle office, with scheduling typically available within 3-5 business days during peak season.
- Steel Lake
- Dash Point
- West Campus
- Enchanted Parkway corridor
- 320th Street corridor
Service Area - Cities Near Federal Way
Our crews serve the full South King County corridor. We regularly schedule work in Auburn, WA, Kent, WA, Renton, WA, and Issaquah, WA from the same dispatch.
Serving Federal Way, WA - Our Local Coverage Area
We’re based in the Federal Way area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Federal Way
Most chimney repairs and liner replacements require a King County permit; we handle permit submission as part of our scope and include it in your written price. Call (425) 696-0387 to confirm what your specific job requires.
We typically book Level 2 inspections within 3-5 business days; during October-November rush we recommend calling two weeks ahead. Live phone support is available 24/7 to hold your slot.
Yes, we work in Federal Way’s planned communities and provide the documented photo records many HOAs require for exterior modification approvals. We deliver the documentation under Haven Standard Clause 4 with every visit.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Federal Way Customers Say
"We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D."Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O."They told me the flue was fine and I did not need a liner. Charged me for the inspection and nothing else. That is why I have called them twice since."
- Hal M.