Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Seattle, WA
Chimney cap and crown work in Seattle typically runs $340-$1,200 for repairs and $890-$2,400 for full replacement, with most jobs scheduled within a week during the dry summer months. We’re Level Two Chimney Co., and our Seattle office dispatches crews across the city with NFPA 211 Level 2 camera inspections included on every visit. Call us at (425) 696-0387 for a written price before any work starts.
Seattle’s 150-plus rainy days per year hit chimney crowns harder than almost any other major U.S. city. Moisture intrusion, not creosote buildup, is the dominant threat here. Our technicians find spalled brick, eroded mortar, and cracked crowns on nearly every century-old chimney in Ballard, Wallingford, and Fremont, where Craftsman bungalows built between 1905 and 1940 still carry original clay-tile liners and unreinforced brick that has never been repointed.
Why Seattle Homes Are Different
Seattle’s marine climate keeps masonry saturated for months. High humidity plus regular winter freeze-thaw cycles, even mild ones, crack mortar joints and spall bricks far more aggressively than in drier inland Northwest cities. Many homeowners only discover the damage after a gas insert installation goes wrong, an increasingly common scenario in Ballard and Wallingford where owners converted wood fireplaces to gas without relining the oversized flue.
The Puget Sound Clean Air Agency’s wood-burning restrictions add another layer. When bans lift, homeowners fire up damp flues that have been open to saturated air for weeks, accelerating liner deterioration and creating real backdraft risk. Unlike drier climates where annual creosote removal is the primary concern, our Seattle inspections routinely flag water damage as the most urgent problem.
Original clay-tile liners in these homes were never designed for modern gas appliance BTU loads. The mismatch between an undersized gas insert and an oversized, moisture-damaged flue is a carbon monoxide hazard we document with camera footage on every inspection.
Our Main Seattle Services
Three services drive most calls from Seattle homeowners. Jump to your job below.
Chimney Cleaning & Sweep in Seattle
We clean and sweep chimneys across Seattle with NFPA 211 Level 2 camera documentation included, not sold separately. Our crews handle everything from routine Class I creosote removal in Capitol Hill row houses to heavy Class III glazed deposits in Central District foursquares that sat unused through burn bans. Every sweep gets a written price before we start and a photo record when we’re done. Chimney Cleaning & Sweep in Seattle
Chimney Repair in Seattle
Seattle’s wet climate destroys mortar joints and crowns faster than creosote accumulates. We repoint spalled brick in Fremont bungalows, rebuild deteriorating crowns in Wallingford, and address water intrusion before it reaches the firebox. Our repairs use materials sourced through the Haven buying network, and every job starts with a written scope and price. Chimney Repair in Seattle
Fireplace Services in Seattle
Gas insert conversions are popular in Seattle during PSCAA burn bans, but an unlined oversized flue venting a low-BTU gas appliance creates backdraft risk. We inspect the smoke chamber, verify flue sizing, and document liner condition with camera footage before any fireplace service begins. Written price, written warranty, every time. Fireplace Services in Seattle
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Cap & Crown in Seattle
Cap and crown work is the most common repair we perform in Seattle, where 150 days of annual rainfall directly attack exposed masonry. In Ballard and Wallingford, we regularly find crowns cracked through by freeze-thaw cycles and caps rusted or missing entirely, letting water saturate the flue year-round. A proper cap installation or crown repair stops this intrusion before it requires a full rebuild. Chimney Cap & Crown work follows Haven Standard Clause 4, with photo documentation on every visit.
Cap Installation
Signs you need it
No cap is present, or the existing cap is rusted, improperly sized, or allowing water and animal entry into the flue.
What it costs in Seattle
Chimney cap installation in Seattle typically ranges $340-$890 for standard single-flue models.
How we do it
We measure the flue, select a stainless steel or copper cap from Famco or Copperfield, and secure it with proper mounting hardware that won’t damage the crown.
Crown Repair
Signs you need it
Visible cracks in the concrete crown, water staining on interior firebox walls, or efflorescence white powder on exterior brick below the crown.
What it costs in Seattle
Crown repair in Seattle typically ranges $450-$1,200, with full crown replacement running $1,200-$2,400.
How we do it
We grind out cracks, apply a bonding agent, and pour new high-strength concrete sloped to shed water, or apply a flexible crown coating for smaller cracks.
What Chimney Cap & Crown Costs in Seattle
| Item | Typical range in Seattle |
|---|---|
| Cap installation | $340-$890 |
| Crown repair | $450-$1,200 |
| Full crown replacement | $1,200-$2,400 |
How long does a crown repair last in Seattle’s climate?
A properly poured concrete crown with adequate slope and overhang lasts 15-25 years even in Seattle’s wet climate; crown coating applications typically need refreshment every 5-8 years. Call (425) 696-0387 for an exact quote - estimates are free.
Can I wait until summer to fix a cracked crown?
Every rainy season deepens crown cracks through freeze-thaw expansion; we document the progression with camera footage so you can decide based on actual moisture intrusion evidence, not pressure. Call (425) 696-0387 for an exact quote - estimates are free.
Chimney Liner & Rebuild in Seattle
Liner and rebuild work addresses the hidden danger in Seattle’s vintage housing stock: original clay-tile liners, cracked by a century of wet winters, venting modern gas inserts into oversized flues. In Ballard and Wallingford especially, we find gas conversions completed without proper relining, creating backdraft and carbon monoxide risk that camera inspection reveals. Chimney Liner & Rebuild jobs include full NFPA 211 Level 2 documentation under Haven Standard Clause 4.
Stainless Steel Liner
Signs you need it
Cracked or missing clay tiles visible on camera inspection, or a gas insert installed in an unlined wood-burning flue.
What it costs in Seattle
Stainless steel liner installation in Seattle typically ranges $2,400-$4,800.
How we do it
We measure the flue, order a DuraFlex or Olympia Chimney stainless liner cut to length, and drop it from the top with proper insulation pack and top plate seal.
Partial Rebuild
Signs you need it
Spalled brick above the roofline, a leaning chimney stack, or mortar joints eroded to finger-depth after decades of Seattle rain exposure.
What it costs in Seattle
Partial chimney rebuild in Seattle typically ranges $3,600-$7,200.
How we do it
We dismantle to sound masonry, salvage matching brick where possible, and rebuild with proper crown, cap, and cricket integration for water management.
What Chimney Liner & Rebuild Costs in Seattle
| Item | Typical range in Seattle |
|---|---|
| Stainless steel liner | $2,400-$4,800 |
| Partial rebuild | $3,600-$7,200 |
| Full chimney rebuild | $8,400-$16,800 |
Does every gas insert need a new liner?
Not every insert requires relining, but every insert requires verification: we camera-scan the existing flue, measure BTU output against venting capacity, and show you the footage before recommending any work. Call (425) 696-0387 for an exact quote - estimates are free.
How disruptive is a partial rebuild?
Most partial rebuilds complete in 2-3 days with scaffolding on the exterior only; interior access is rarely needed unless the firebox itself is damaged, which we determine during initial camera inspection. Call (425) 696-0387 for an exact quote - estimates are free.
Brands We Service in Seattle
We stock and install parts from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield through the Haven buying network, keeping lead times short and prices transparent for Seattle homeowners. Most cap and liner components arrive within 48 hours. our brands
Pricing for Chimney Cleaning in Seattle, WA
| Service | Typical range in Seattle |
|---|---|
| Chimney sweep & Level 2 inspection | $280-$390 |
| Cap installation | $340-$890 |
| Crown repair | $450-$1,200 |
| Full crown replacement | $1,200-$2,400 |
| Stainless steel liner | $2,400-$4,800 |
| Partial chimney rebuild | $3,600-$7,200 |
| Full chimney rebuild | $8,400-$16,800 |
| Multi-flue cap | $680-$1,450 |
Seattle prices run toward the higher end of national ranges due to access challenges on steep roofs, the prevalence of century-old masonry requiring delicate handling, and permit coordination with the city. Every job gets a written price before work starts under Haven Standard Clause 1 - no exceptions, no surprises.
Neighborhoods We Serve in Seattle
Our Seattle office dispatches crews to chimney-heavy neighborhoods across the city, with scheduling typically available within 5-7 days during peak season and 2-3 days in summer months.
- Ballard
- Wallingford
- Fremont
- Capitol Hill
- Central District
Service Area - Cities Near Seattle
We serve Seattle homeowners directly from our metro office and regularly dispatch to surrounding communities including Bellevue, WA, Kirkland, WA, Redmond, WA, and Bainbridge Island, WA. Each area gets the same NFPA 211 Level 2 camera inspection, written upfront pricing, and documented photo record included on every visit.
Serving Seattle, WA - Our Local Coverage Area
We’re based in the Seattle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Seattle
Most chimney repairs and liner installations require a Seattle Department of Construction and Inspections permit; we handle permit filing as part of our scope and include the cost in your written price before work begins.
Burn bans don’t stop inspection and repair work - in fact, they’re an ideal time to schedule maintenance so your system is ready when burning resumes; we simply coordinate around outdoor air quality alerts for any work requiring venting or testing.
We typically schedule Seattle appointments within 5-7 days during fall and winter peak season, and within 2-3 days from May through September; emergency water intrusion calls get priority assessment.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Seattle Customers Say
"Clean, careful, put down sheeting, and the fireplace works properly for the first time since we moved in."
- Yvette S."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D."Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O.