Famco Chimney Repair Nationwide

Famco Chimney Repair in Bellevue: What to Know First

We provide independent Famco chimney repair in Bellevue, typically scheduling within 3-5 business days and delivering a written price before any work starts. Most Famco repairs run $340-$1,800 depending on whether we’re repointing mortar joints, rebuilding a spalled crown, or replacing failed flashing on a multi-flue chase cover. This page is for Famco owners in Bellevue, Lakemont, and the Crossroads area who need their chimney fixed right and want to see what they’re paying for before a tool comes out of the truck. Call (425) 696-0387 for a free estimate with written scope.

Call (425) 696-0387

How Famco Products Fail - and How We Fix Them

• Famco chimney caps and chase covers (galvanized and stainless series) - rust-through at weld points. The galvanized line especially shows pinhole leaks at corner seams after 8-12 years in Bellevue’s wet season. Water hits the flue liner directly, accelerating spalling in the smoke chamber below. We pull the cap, document the weld failure with the camera, and source replacement Famco stainless or upgrade to a Gelco cap through our Haven buying network. The new unit gets a bead seal at the corners, not just the factory tack.
• Famco top-mount dampers - cable freeze and frame distortion. The cast-aluminum frames on older Famco top-sealing dampers warp slightly after repeated thermal cycling, letting the cable bind in cold weather. In Bellevue, we see this most in Lakemont homes that burn weekends only; the damper sits cold and wet all week. We test cable travel with a pull gauge, and if the frame is out of flat more than 3/16 inch, we replace with a Famco-compatible unit or a HeatShield damper system that seals to a rebuilt smoke shelf.
• Famco chimney pots and decorative shrouds - crack propagation in freeze-thaw. The terracotta and cast-concrete pots sold under the Famco line absorb moisture through hairline cracks, then shed shell layers during Bellevue’s January freeze cycles. We remove the pot, inspect the flue opening for spalling brick, and either re-bed the original on a new mortar wash or source a replacement through Copperfield if the unit is discontinued. The camera goes down before we quote; we’ve found collapsed flue tiles hidden under intact-looking pots twice in the past year.
• Famco flashing kits - separation at the step-flue intersection. Famco’s pre-formed base flashing works well on straight runs but struggles where the chimney meets a roof with dimensional shingles and a cricket, common in 1970s Bellevue split-levels. The L-foot doesn’t seat fully, capillary action pulls water behind, and we find rot in the sheathing when we open it up. We custom-fabricate step flashing from 26-gauge galvanized or match existing copper, counter-flashed into the mortar bed with lead or FlexWrap depending on code year.
• Famco exhaust fans and vented chimney systems - motor housing corrosion. The FAM-EX series vent fans draw combustion air through the chimney chase, and the motor housing sits in the exhaust stream. After five years, the housing weeps rust onto the smoke chamber below, staining mortar and accelerating joint failure. We pull the fan, document the housing with photos, and replace with a new Famco unit or cross-reference to an Olympia Chimney equivalent if the FAM-EX is back-ordered. The new install gets a stainless drip shield we fabricate in-shop.

Our Famco Chimney Repair Process

1. 1
   Call and schedule. A live person answers, checks availability for Bellevue, and books a 2-hour arrival window. You’ll get a text when your tech is en route.
2. 2
   NFPA 211 Level 2 inspection with camera. We run the camera the full flue length, inspect the exterior with the ladder, and photo-document every Famco component: cap, damper, flashing, and any visible model numbers. Clause 4 of the Haven Standard requires this record on every job.
3. 3
   Written price and scope before work. Corrine Halstead reviews the findings, sources Famco or cross-compatible parts through our Haven buying network, and delivers a written price with line-item costs, timeline, and warranty terms. No work starts until you sign.
4. 4
   Repair with Famco-specific technique. We match Famco mortar specs for repointing (Type N for above-grade, Type S for crown work), use factory-compatible fasteners on cap replacements, and test damper operation with a draft gauge before we pack up.
5. 5
   Photo record and test burn. The camera goes down again to verify flue integrity post-repair. We run a test fire or fan cycle, check CO readings at the appliance, and upload the complete photo set to your job record.
6. 6
   365-Day Done Right Promise in writing. If it’s not done right, we make it right. The warranty, photos, and invoice are archived under Haven Standard Clause 4.

Before

After

What Famco Chimney Repair Costs in Bellevue

These are real Bellevue prices for real Famco jobs we’ve completed, not bait-and-switch ranges. A full rebuild on a Lakemont two-story with scaffold runs higher; a straightforward cap swap on a single-flue ranch in Crossroads sits at the low end. We deliver your exact number in writing before work starts - Haven Standard Clause 1. Call (425) 696-0387 for a free estimate.

Why Bellevue Homeowners Call Level Two Chimney Bellevue for Famco Work

We’ve inspected and cleaned more than 38,000 chimneys since 2009, and a growing share in Bellevue run Famco caps, dampers, or vent hardware. The camera doesn’t guess. Neither do I. When Corrine Halstead pulls the footage, she walks you through exactly what it shows - no summaries, no guesswork. Our techs carry Famco-compatible inventory and cross-reference to DuraFlex, HeatShield, and Gelco lines when the OEM part is discontinued or back-ordered, so you’re not held hostage by a supply chain. Every job gets a written price, a photo record, and the 365-Day Done Right Promise. We’re independently owned and operated, background-checked, and uniformed, with license info on every page.

FAQs