Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Lynnwood
Chimney repair in Lynnwood typically runs $450-$2,800 depending on scope, and every job starts with a camera-scan Level 2 inspection so you see the defect before we quote a price. We’re Level Two Chimney Co., and our crews serve Lynnwood from our Seattle dispatch office with same-week scheduling for most repair calls. You can reach us at (425) 696-0387 - a live person answers, 24 hours a day.
Lynnwood’s 1960s and 1970s neighborhoods - Martha Lake, Meadowdale, the ranch tracts off 196th St SW - were built with original masonry chimneys that are now 50 to 60 years old. Many share a stack between attached units, which means your neighbor’s furnace exhaust can migrate into your flue through cracked mortar joints. That’s not a theory; it’s a condition we document regularly, and it’s why we won’t start any Chimney Repair without a camera down the flue.
Why Level Two Chimney Bellevue Is Lynnwood’s Preferred Chimney Repair Company
We’ve completed more than 38,000 chimney inspections and cleanings since 2009, and a significant share of those have been in Snohomish County. Lynnwood homeowners find us because they read our three-star reviews too - they want to know how we handle the job that didn’t go perfectly, and they see we make it right under our 365-Day Done Right Promise.
Our techs are background-checked, uniformed, and assigned by name. You get a text when your tech is en route. License information is displayed on every page, and every quote is delivered in writing before work starts - Haven Standard Clause 1, “Have it in writing.” No exceptions. We don’t do “call for a quote” because the quote should already be in your hand.
Dispatch runs from our Seattle office, but crews are in Lynnwood regularly. Most repair inspections are scheduled within a few days, and we carry DuraFlex liner materials, HeatShield refractory mortar, and Gelco crown compounds on our trucks so we’re not ordering parts after we find the problem.
We know the local housing stock. The split-levels near Martha Lake, the ranches off 164th St SW, the raised ranches in Meadowdale - we’ve inspected and repaired chimneys in all of them. That matters when you’re trying to figure out whether the black staining at your damper is creosote or something worse.
Our Chimney Repair Services in Lynnwood
Mortar Repointing
Mortar repointing in Lynnwood runs $18-$32 per square foot of joint surface, with most single-family jobs falling between $850 and $1,800. The 1960s and 1970s brick in Lynnwood’s original construction was laid with lime-based mortar that has now endured 50+ years of thermal cycling and 37-40 inches of annual rainfall. We grind out the deteriorated joint to proper depth, match the original mortar composition, and tool it to shed water. Repointing without addressing the crown and flashing is a short-term fix in this climate - water finds the new joint within a few seasons if the crown still leaks. We inspect and quote crown and flashing work as part of the same scope.
Spalling Brick Repair
Spalling - the flaking and crumbling of brick faces - is common on Lynnwood chimneys where water has penetrated the masonry and frozen in the pore structure. Our climate doesn’t produce deep freeze-thaw cycles like the Midwest, but the persistent moisture and occasional sub-32°F nights are enough to degrade brick that was already saturated. Spalling repair ranges from $400 for localized brick replacement to $2,200 for more extensive rebuilding of the upper courses. We source matching brick through our Haven buying network when possible, and we always document the underlying moisture source with photos before we quote.
Chimney Waterproofing
Chimney waterproofing in Lynnwood costs $350-$650 for a standard application of vapor-permeable silane/siloxane sealant to the exterior masonry. This is not a cosmetic treatment - it’s a breathable barrier that keeps liquid water out while letting trapped moisture escape. Given Lynnwood’s eight-month wet season, waterproofing is often the difference between repointing that lasts 20 years and repointing that needs touch-up in five. We apply it only after repairs are complete and the masonry is dry, and we include a written warranty with the application date and expected service life.
Flashing Repair
Flashing repair in Lynnwood ranges from $275 for simple counter-flashing reseal to $1,400 for full step-flashing and saddle replacement on a chimney with significant roof intersection exposure. The bigleaf maple and red alder that shade many Lynnwood roofs drop debris that holds moisture against the flashing, accelerating corrosion. We use copper or stainless step flashing with a proper cricket (a peaked diversion structure) where the chimney is wider than 30 inches, and we photograph the roof deck condition during the repair. Flashing work is quoted in writing with a sketch of the proposed configuration - Haven Standard Clause 1.
Chimney Rebuilding
When a Lynnwood chimney has deteriorated beyond localized repair - typically when spalling affects more than 30% of the brick surface, or the stack has shifted on its footing - partial or full rebuilding becomes necessary. Rebuilding from the roofline up runs $2,200-$4,800; full rebuilds including footing assessment range higher. We document the existing structure with photos and measurements, provide a written scope and price before demolition, and source materials through our Haven network to keep pricing honest.
Tuckpointing
Tuckpointing is the cosmetic refinement of repointing, where we cut thin grooves in the new mortar and fill them with a contrasting color to match historic joint profiles. In Lynnwood’s mid-century ranch neighborhoods, this is rarely needed for aesthetic reasons, but we offer it where homeowners want to preserve a specific visual character. Tuckpointing adds $4-$8 per square foot to standard repointing costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Lynnwood
We stock and install DuraFlex stainless steel chimney liners, HeatShield cerfractory flue resurfacing systems, and Gelco crown repair compounds on every Lynnwood service truck. These materials move through Haven’s buying network, which means we’re not marking up special-order freight - the price we quote reflects actual material cost plus labor. For cap and damper replacements, we carry Famco and Copperfield components sized to the 8×8, 8×12, and 13×13 flue dimensions common in Lynnwood’s 1960s and 1970s construction. Fast turnaround matters when your chimney is open to the weather, and keeping inventory local lets us complete most repairs in one visit.
Common Chimney Repair Problems We See in Lynnwood Homes
- Shared-stack cross-contamination in attached ranches and split-levels. In Martha Lake and Meadowdale tracts built during the Boeing boom, neighboring units often vent into the same brick chimney. A failed mortar joint between flues lets furnace exhaust migrate into your fireplace flue. A flashlight inspection misses this; a Level 2 camera inspection finds it.
- Third-degree glazed creosote from DIY-seasoned alder. Lynnwood homeowners with bigleaf maple and red alder on their property often cut and burn their own wood. Alder cut in spring and burned by October hasn’t reached the 12-18 months of drying needed. The result is hard, shiny, tar-like creosote that rotary brushing alone won’t remove - and that requires chemical treatment or replacement of the affected liner section.
- Crown cracking and mortar spalling from persistent moisture. Lynnwood’s 37-40 inches of annual rain, delivered over eight months of overcast, keeps masonry saturated. Cracked crowns let water into the stack; freeze-thaw at the surface pops brick faces. Repointing without crown repair is temporary in this climate.
- Original clay tile flue liners with thermal-cycling cracks. The 1960s and 1970s clay liners in Lynnwood’s housing stock have expanded and contracted through 50+ years of heating seasons. Hairline cracks visible on camera may not require immediate relining, but we document them with photos and measurements so you have a baseline for comparison at your next inspection.
Pricing for Chimney Repair in Lynnwood, WA
| Service | Typical Range in Lynnwood |
|---|---|
| Level 2 inspection with camera | $225-$295 |
| Mortar repointing (per sq ft) | $18-$32 |
| Typical repointing job total | $850-$1,800 |
| Spalling brick repair (localized) | $400-$2,200 |
| Chimney waterproofing | $350-$650 |
| Flashing repair | $275-$1,400 |
| Partial rebuild (roofline up) | $2,200-$4,800 |
These ranges reflect Lynnwood’s market - labor rates, material access through our Haven network, and the typical scope of repair needed on 50-60 year old masonry. Every quote is written and itemized before work begins. We also offer a Free Second Opinion on any competitor’s written estimate. Call (425) 696-0387 for an exact quote - estimates are free.
We Also Serve Cities Near Lynnwood
Our crews work throughout the Eastside and Snohomish County, including Lynnwood, Bothell, Woodinville, Kirkland, and Redmond. Scheduling is coordinated from our Seattle office, with local routing that keeps us in your area regularly.
Serving Lynnwood, WA - Our Local Coverage Area
We’re based in the Lynnwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Repair in Lynnwood
You need a Level 2 inspection with a camera to confirm cross-contamination between shared flues. We were called to a 1968 split-level off 164th St SW near Martha Lake where the homeowner kept smelling furnace exhaust at the firebox on cold mornings and saw black staining at the damper. Our tech ran a Level 2 inspection with a camera and found the neighboring unit’s flue shared the same brick stack, with a failed mortar joint letting flue gas migrate through the wythe into the fireplace flue; we documented the spalling crown, then installed a HeatShield flue liner on the firebox flue and repointed the joint with Gelco mortar to restore draft separation. After capping the stack and waterproofing the crown, the smell stopped and the draft test pulled clean. If you suspect this condition, call (425) 696-0387 - we’ll camera-scan the flue and show you what we find.
That’s third-degree glazed creosote, and in Lynnwood it’s almost always from burning alder or maple that wasn’t seasoned long enough, at the low smoldering temperatures our cool marine climate encourages. Alder cut in spring and burned by October hasn’t dried the 12-18 months needed; the moisture drives incomplete combustion, and the cool flue temperatures let the tar condense and bake onto the liner. Rotary brushing won’t remove it - chemical treatment or liner replacement is required, confirmed by camera inspection. We document the deposit class and extent with photos before quoting any remediation. Call (425) 696-0387 for an inspection and written estimate.
Not necessarily - cracked clay tiles can often be relined rather than rebuilt. We measure crack width, pattern, and location with a camera, then compare against NFPA 211 standards. Hairline longitudinal cracks in otherwise sound tile may be addressable with a stainless DuraFlex liner; widespread spalling, shifted tiles, or gaps at the joints may indicate the need for partial rebuilding. We give you the photos, the measurements, and a written price for each option before any work starts. Call (425) 696-0387 to schedule a Level 2 inspection.
Lynnwood’s 37-40 inches of annual rain, delivered persistently from October through April, means your masonry is rarely fully dry. A cracked crown lets water into the stack body; failed flashing lets it into the roof structure. Repointing mortar joints without fixing the crown and flashing is like replacing a wet carpet without fixing the roof leak - the new joint will re-saturate and deteriorate within a few seasons. We inspect crown and flashing on every repair call, include photos in our documentation, and quote any needed work in the same written scope. Clause 4 of the Haven Standard requires this photo record on every job.
We use a camera on every inspection - it’s the defining practice of our company, and it’s been standard since 2009, years before regulators or insurers asked for it. That practice became Clause 4 of the Haven Standard: a documented photo record on every visit. For repair work specifically, the camera confirms the defect we’re quoting, verifies the repair was executed correctly, and establishes a baseline for future comparison. You get the photos, the footage, and a written report. No exceptions, no optional add-on fees. Call (425) 696-0387 to schedule - estimates are free.
Ready to see what’s actually going on in your chimney? Call Level Two Chimney Co. at (425) 696-0387. A live person will answer, 24 hours a day, and we’ll get you scheduled for a Level 2 inspection with camera documentation, a written price before any work starts, and the 365-Day Done Right Promise on every repair we complete.
Written by Corrine Halstead, Owner at Level Two Chimney Co., serving Lynnwood and the greater Seattle metro since 2009.